Worktops,Countertops and Table tops finishes

Worktops,Countertops and Table tops finishes

We can offer two great finishes for our wood countertops, worktops, butcherblocks, and other wood panels. Denmark Natural Worktops Oil (approved FDA) and German brand of lacquer products in combination to achieve a waterproof, penetrating, organic, and food safe finish that is perfect for everyday use surfaces like a wood island top.

worktop finish

WOCA Worktop Oil is designed for untreated or previously oiled/sanded wood surfaces.

  • Provides a dirt- and water resistant surface
  • Suitable for both light and dark types of wood
  • Enhances the colour of the wood
  • Components are FDA approved

B218057AAD0DAC518B6F8297E8430EE2 woca worktop oil$_35

How to…

1.If the surface is particularly smooth, sand the surface with sandpaper grit 180.

2.Make sure the wood is dry and devoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning, let the tabletop dry for at least 8 hours.

3.Stir the oil thoroughly before use.

4.Use a paintbrush to apply a suit­able amount of oil in an even, adequate coat.

5.Wait approx. 20-30 minutes at 20ºC as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet in wet lengthwise the wood grain with sandpaper grit 320-400.

6.Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface.

7.Carefully polish the wood using a white polishing pad, which makes the surface more hard-wearing.

8.Repeat the treatment on highly absorbent surfaces.

9.The oil is thoroughly hardened after 24 hours at 20ºC. Do not let the tabletop become wet during the hardening process.

Use Worktop Oil to maintain the tabletop four times a year, or as often as necessary. Before starting the maintenance procedure, clean the worktop using Wood Cleaner, and let the surface dry for at least 8 hours. Follow the procedure in items 2 through 7, but apply only one coat of oil.

Technical data

Product properties
Form: Liquid
Flash point: >100
Density: 0,9-1,1
Coverage: 12-15 m2/litre
Colours: Natural and white.
Odour: Faint
Application tools: Brush, roller or lint-free cotton cloths. Possibly oil-wetted -sanding paper 320-400 grit and white polishing pad.
Cleaning of tools: Clean tools with Solvent.
Disposal: Empty containers and residues to be disposed of according to local regulations.
Available pot sizes: 0,75 litre

Comments are closed